Home > Potentiometers > Thumbwheel Potentiometers > F-12 Series Common Specifications

F-12 Series Specifications
Electrical Characteristics
Total Resistance (Tolerance) 100 ohm - 1Meg ohm (±20%)
Resistance Tapers Available A, B, C, D
Max. Operation Voltage Linear Taper: 150VAC
Other Tapers: 100VAC
Rated Power  Linear Taper: 0.1W
Other Tapers: 0.05W
Sliding Noise Less than 100 mV
Insulation Resistance More than 50 M ohm at 500 V DC 
Withstand Voltage 1 minute at 500 V AC
Residual Resistance Term. 1 - 2: Less than 20 ohm 
Term. 2 - 3: Less than 20 ohm
Switch Circuit (Where Applicable) Single Pole Single Throw (SPST)
Switch Contact Resistance Less than 50 Meg Ohms
Switch Rated Power 1.0A at 12VAC/12VDC
Mechanical Characteristics
Total Rotational Angle 230º ± 10º
Rotational Torque 20 gf.cm - 150 gf.cm
Rotational Stopper Strength 2.0 Kgf.cm Min.
Push-Pull Strength Push 1.0 Kgf Min.
Switch Rotational Angle 35º ± 10º
Switch Action 100 - 350gf. cm 
Durability (Rotational Life) 10,000 Cycles
Some models in series may deviate from above specifications. Please see individual data sheets. Dimensions and specifications subject to change without notice.

Shokai Far East Ltd. 9 Elena Court  Cortlandt Manor NY 10567 914-736-3500 Fax: 914-736-3656 
E-mail: sales@shokaifareast.com   http://www.shokaifareast.com